| Step 1: |
Check out the graffiti and surface to be cleaned. Example shown: Spray paint on brick. |
| Step 2: |
Brush the AG Strip Paste on to the graffiti with a circular motion. Use approx. 200 grams of Strip Paste per SqM. Do not apply to more than
1 SqM. Leave for approx. 5-15 mins. depending on the degree of contamination and type of graffiti. |
| Step 4: |
With a stiff brush work the paste and fluid together with the graffiti to a smeary paste until the surface underneath begins to re-appear. |
| Step 5: |
Use a high pressure hose to clean off the mixture of paste, fluid and dissolved graffiti. |
| Step 6: |
The process is complete. The surface is now completely free of graffiti. |
| Step 7: |
Spray the graffiti- free surface with AVKOTE AG PROTECTOR (Sacrificial Coat). Because this is a safe water-based, non-toxic product it can
also be brushed or rollered onto the surface. |
| Step 8: |
Graffiti re-appears on treated surface. |
| Step 9: |
Using a pressure hose remove the protector coat with the graffiti clinging to it. This in most circumstances should restore the surface.
However, if graffiti is very stubborn simply spray the area with AG Strip Fluid, work in with a stiff brush, then hose off. Finally re-apply the
Protector Coat to the affected area to leave the wall as clean as before. |
